Description
10m Phono Ext Lead
10m Phono Ext Lead
£7.99
10m Phono Ext Lead.
Related Products
Replacement Buzzer for Dolphin 4 sensor (400) systems
This buzzer is the same as those supplied with our most popular award winning reverse parking sensor kits. You can fit it within the lining of the vehicle or under the parcel shelf, it is quite loud so you should be able to hear it from the location that best suits your needs.
The buzzer can be attached using an adhesive strip or for a more permanent / secure fitting 2 screws can be used to screw in the lining of the car
7 Inch Dash Monitor Sun Visor
Plastic Sun Visor for 7″ Dash Monitors – as seen in photos.
Clips on to 7-Inch Dash Monitors using 2 small side notches.
Not for random Sat Navs or Built-In Monitors.
***IF UNSURE, CHECK BEFORE PURCHASING – USE THE DIMENSIONS BELOW TO HELP***
Measures approx 17.7cm x 8.3 with a 4.4cm visor top.
*Dash Monitor NOT INCLUDED – visor only.
Extension Cable for Buzzer or Dash Display (Dolphin 4 sensor systems)
- 4 Meter Extension Lead With 4 Pin Connector
- Extends Either Your Buzzer Or Display On Dolphin Automotive Parking Sensor Kits
- Compatible With DPS400, DMS400, DFM400, MPS400 and VPS400 Audio Parking Sensor Kits & Corresponding Front Kits
- Compatible With DPS450, DMS450, DFM450, MPS450 and VPS450 Display Parking Sensor Kits & Corresponding Front Kits
- Please Check Connector For Use With Any Other Manufacturers Kits or Applications.
4 Pin Marine/Aviation to RCA and Power for Automotive Camera Female RCA Connection with Adapter to convert to Male if required Female 12v DC Jack plug 2.1mm x 5.5mm
- 4 Pin Marine/Aviation to RCA and Power for Automotive Camera
- Female RCA Connection with Adapter to convert to Male if required
- Female 12v DC Jack plug 2.1mm x 5.5mm
Van Reversing Monitor Wire Loom
Van Reversing Monitor Wiring Loom. For use with 8 pin connecting plug (check images).
Reversing Camera Power Cable
12v DC power cable for most reversing cameras.
2.1mm Male Jack Plug
1m Cable Length
Replacement Dash Display for Dolphin 4 sensor (450) systems
Dolphin Display with integral buzzer for Dolphin 450 (4 sensor) systems
This is the same display that is provided in the most popular award winning Dolphin kits. Bothe the display and the sound emitted are crisp and clear.
The display will show you if you are closer to an obstacle on the right or left side of the vehicle rather than giving you a more general reading for the whole vehicle that would not be as accurate for the vehicles actual positioning
Mirror Mounting Bracket, Arm, Stem or Stalk on it’s own
We have a selection of the most popular mounting arms in our range which are designed to attach to our 7″ mirror monitor. Each one attaches to a different type of mounting boss or mounting plate witch is pre-attached to the windscreen.
Reviews
There are no reviews yet.