Home » Shop » Van Reversing Cameras » Universal Fin Reversing Camera

Universal Fin Reversing Camera

£69.99£89.99

  • Universal / Generic Design Parking & Rearview Driving Camera Mounts On The Rear Of Any Van / Lorry. Plastic Housing So Will Not Rust.
  • Rear Camera Faces Downwards Towards The Rear Bumper For Help Parking & Reversing. It Has LED Nightvision & Optional Guidelines.
  • Either Connect To Reversing Light Feed To Activate On Reverse Gear Or To 12v Ignition Switched Feed For Always On Viewing.
  • Camera Housing Bolts To The Side OF Your Van Or Lorry. Includes Screws, Rubber Gasket, Power Cable & 10m Video/Phono Lead.
  • Camera Is On A Ball & Socket Joint For Final Angle Adjustments. Offered Alone Or With 4.3″ Monitor That Can Adhere To Dashboard Or Windscreen, Or Larger 7″ Dash Monitor Option.
  • Dolphin Automotive Is A UK Brand Of Trading Direct Ltd, Established 1997. Over 25 Year Experience Fulfilling UK & European Customers Driving Requirements.
Clear selection
SKU: DOLC-FIN Category:

Description

  • Universal / Generic Design Parking & Rearview Driving Camera Mounts On The Rear Of Any Van / Lorry. Plastic Housing So Will Not Rust.
  • Rear Camera Faces Downwards Towards The Rear Bumper For Help Parking & Reversing. It Has LED Nightvision & Optional Guidelines.
  • Either Connect To Reversing Light Feed To Activate On Reverse Gear Or To 12v Ignition Switched Feed For Always On Viewing.
  • Camera Housing Bolts To The Side OF Your Van Or Lorry. Includes Screws, Rubber Gasket, Power Cable & 10m Video/Phono Lead.
  • Camera Is On A Ball & Socket Joint For Final Angle Adjustments. Offered Alone Or With 4.3″ Monitor That Can Adhere To Dashboard Or Windscreen, Or Larger 7″ Dash Monitor Option.
  • Dolphin Automotive Is A UK Brand Of Trading Direct Ltd, Established 1997. Over 25 Year Experience Fulfilling UK & European Customers Driving Requirements.

 

Looks Factory Fitted

Our Dolphin Automotive range of van reversing cameras are designed to fit so well they look like original factory fitted equipment. By mounting on the rear side rather than top of your van or lorry you will not be adding any additional height to your vehicle and will prevent the camera from getting damaged.

Mounts Against Flat Surface

The camera is only 12.5cm wide and 6cm high so it just needs a small flat surface area to bolt flush against. You will need somewhere suitable to make a small hole for the wiring to pass into the vehicle. The kit includes a rubber seal for a waterproof fit.

Cost Effective

As your van is one of your largest investments in your business then fitting a reversing camera is a cost effective outlay as it helps keep your investment and you on the road and earning money. It also helps you check you have your rear doors, roller door or tail lift shut and secured.

Extra Features

Where the size and design of the housing allows, we have taken the opportunity to add an adjustable ball-socket for final alignment for the optimum angle looking down at the rear bumper to make best use of those final few feet when reversing in limited space. Our camera also offers guidelines but these can be deactivated by simply cutting a wire loop if not wanted.

You can buy our cameras on their own if you already have a compatible head unit you can plug them into or we offer a range of dashboard mounted and rear view mirror mounted monitors. Please note some modern inbuilt manufacturer supplied head units my not use a standard Phono/RCA input or may need ‘programming’ to switch the reversing camera option to On with the vehicles ECU management system so check this out.

 

Reviews

There are no reviews yet.

Be the first to review “Universal Fin Reversing Camera”

Your email address will not be published. Required fields are marked *